scraper winch Mine hoisting equipment Complete model 15KW scraper winch Discount Winch Item NO.: 1943279

Please contact customer service

Price is not the real price

Bargaining is necessary

scraper winch
Product introduction
Rake winch is mainly used for ore handling and filling in pits or open pits of metal mines and other mines. It is mainly used for horizontal harrowing, but also for slope harrowing with small inclination, not as lifting equipment. The driver can operate the winch by hand, and can operate the winch several meters or even tens of meters away with buttons.
The scraper winch uses the steel wire rope wound on the drum to pull the scraper bucket back and forth to rake and transport materials.
Scraper winch consists of winch, scraper and pulley. Harrow winch is mainly used in metal mines and other mine pits and open-air places to harrow and fill minerals on the working face with low level and inclination.
Product classification and model significance of harrow winch
There are 2jpb-7.5, 2jpb-15, 2jpb-22 and 2jpb-30 winch models.
Rake winch (take 2jpb-7.5 as an example) Introduction:
2: Quantity of wire rope drum; J: winch type; P: scraper winch; B: explosion proof; 7.5: power of motor
Technical parameters of scraper Winch:
Model
Company
2JPB-7.5
2JPB-15
Average tension of main wire rope:
Kn
Eight
Fifteen
Average speed of main wire rope:
M/s
One point one
One point one
Average speed of auxiliary wire rope:
M/s
One point five
One point five
Main wire rope diameter:
Mm
Nine point three
Twelve point five
Diameter of auxiliary wire rope:
Mm
Nine point three
Eleven
Drum diameter: mm
Mm
Two hundred and five
Two hundred and fifty
Drum flange diameter:
Mm
Three hundred and fifty
Four hundred and thirty-five
Drum:
Mm
Eighty
One hundred and twenty-five
Scraper capacity of scraper Winch:
M3
Zero point two five
Zero point two five
Boundary dimension:
Mm
1210*565*490
1525*660*620
Weight:
Kg
Ninety
Six hundred and seventy-two