Explosion proof sound and light alarm Explosion-proof alarm lamp With a flared 180 db (a) ATEX LED sound and light signal lights Item NO.: 336006

Scope of application

1. Dangerous places with explosive gas mixture: zone 1 and zone 2

2. With explosive air mixture: A and B Ⅱ Ⅱ, Ⅱ C grade 3. : temperature classes T1 - T6

Technical parameters

1. Temperature range: -20℃ ~ +50℃

2. Relative humidity: ≤95% no condensation

3. Atmospheric pressure: 80 ~ 110KPa

4. Power voltage: DC24V; AC220V; AC127V.

5. Operating current during alarm: ≤600mA (DC24V)

6. Sound intensity: 100 ~ 115dB

7. Protection grade: IP65

Product features

1. The shell is die-cast ZL102 aluminum alloy, and the surface is sprayed with high-voltage electrostatic plastic;

2. Toughened glass outer cover, stainless steel exposed fastener, protective mesh cover adopts galvanized surface spraying, dual anti-corrosion;

3. Tempered glass cover has strong impact resistance, and a variety of colors such as red, yellow and blue are available;

Notes editor

1. Electric disassembly in inflammable and explosive places is strictly prohibited.

2. Do not damage the flameproof surface during installation and keep it clean. The fastening screw on the flameproof surface should be tightened evenly, and no foreign bodies should be included on the flameproof surface.

3, long-term use to regularly test whether the performance of the alarm is intact, such as failure or damage to the professional maintenance.