portable Mobile lighting system 360 degrees Panoramic lighting Intelligence remote control Lifting box lamp Emergency lamp Item NO.: 1943687

main features
1. Portable, noiseless, waterproof and dustproof
2. Wireless remote control
3. 360 ° panoramic lighting without dead angle
4. Spotlight adjustable
5. 2.05m "height" (raised)
6. Protection class IP65
the box body is made of high-strength plastic and equipped with good waterproof technology to make the system wear-resistant, waterproof, dustproof, antistatic, impact resistant and corrosion resistant.
 the lighting system can be disassembled and assembled simply and quickly, and put into the safe waterproof box, which is convenient for carrying, transportation and site transfer.
 the battery which can be repeatedly recharged is used for power supply, without generator, energy saving, high efficiency, environmental protection and no noise.
 the lamp is composed of high brightness LED lamp to ensure the low energy consumption, high reliability and long service life of the system, with the service life of more than 50000 hours.
 the lamp has strong light, working light, weak light, SOS stroboscopic function, which is convenient for search and rescue and emergency lighting. Easy access to any area.
 LCD display function, low power sound reminder function, convenient to schedule working time.
 equipped with USB output port, it can charge mobile phones, cameras and other digital products in the field.
Usage method
1. Assembly and folding
1.1. Open the box buckle to open the box cover and take out the expansion rod and LED lamp.
1.2 close the box cover, buckle the box and erect the box.
1.3 screw the LED lamp screw hole onto the pan head bolt and fix it.
1.4 insert the expansion rod into the round hole of the fixing block, first turn the expansion rod to determine the lighting direction of the lamp, and then tighten the butterfly screw clockwise.
1.5 unscrew the waterproof cover of the electric socket on the side of the box first, then insert the lamp wire plug into the electric socket and tighten the locking ring to lock the plug.
1.6 open the snap on the expansion bar, stretch the LED lamp to a proper position, and then close the snap again to lock the expansion bar.
1.7 when the lamps are not used, fold them into the box in reverse order.
2. Lighting mode
2.1. After connecting the LED light cord plug to the electric socket, press the key to turn on the light. The continuous press of the LED light will have different brightness, which are: low light → medium light → high light → medium light → low light → off. This cycle.
2.2. LED lamps can be used for 360 ° panoramic lighting, and can also be used for lighting in one direction at the same time.
3. "SOS" mode
3.1. After the LED lamp is on, press and hold the key for 3 seconds under any brightness state (low light, medium light and high light) and release it to enter the SOS function.
4. Remote control mode
4.1. It can control the light on and dimming gear (brightness) of the lamp by wireless remote control within 50m
5. Electric quantity indication
5.1. Equipped with LCD screen power display, when the power is lower than 5%, it will prompt for charging every 10 seconds.
6. charging
6.1. The charging socket is common to the lamp socket. When charging, plug the charger into the electrical socket and rotate the locking ring to fix the plug.
6.2 connect the charger power cord to the (100-240V / AC) power supply until the indicator light on the charger changes from red to green.
6.3. Color change indication of charger indicator: red = charging, green = fully charged.
6.4. The charger output terminal has short circuit and open circuit protection. When the output terminal has short circuit or open circuit, the charger has no output, and the indicator light is green.
6.5. It is recommended to charge in the environment of - 15 ℃ - 40 ℃, and erect the box during charging (i.e. the box state during lighting);
Matters needing attention
 the maintenance of lamps must be carried out in a safe place by professionals.
 when charging or discharging continuously in the place with ambient temperature, the surface of the lamp rises slightly, which is a normal phenomenon.
 the charging port of the lamp shall be tightened immediately after it is fully charged to avoid blocking of sand mud and other foreign matters, which may affect the charging and lighting.
 the product is a precision electronic product. Do not disassemble it without permission.
 the polarity of the battery cannot be reversed, otherwise it may damage the flashlight and shorten the battery life.
 please use a special charger (output is 14.8V 4000ma), otherwise the light source, battery and charger may be damaged.
 do not put the flashlight in high temperature and high pressure environment.
 please do not use any corrosive liquid cleaning products. Use soft cloth with neutral detergent to wipe.
 when the input voltage is low, please charge in time to protect the battery to ensure its service life.
 if it is not used for a long time, please charge and discharge it every half a year.
 his product is only 0.5-1m waterproof, please do not use for deep sea diving.
the company is not responsible for any damage or loss caused by unauthorized disassembly, maintenance or improper operation.
Product technical parameters
Model
T132
Battery type
12V 24Ah
Lamp height (mm)
Two thousand and fifty
Box size (mm)
557*348*248
Light flux (LM) high / medium / low light
12000/6200/3000
Lighting time (H) high / medium / low light
3.5/6/12
Charging time (H)
Ten
Power (W)
One hundred and twenty
Product weight (kg)
Twenty-one