Aluminium aerial work platform GTWY10-200S Item NO.: 1950545

TECHNICAL NOTES:

-LIFTING MODE: HYDRAULIC

-CONTROL MODE: INCHING PRESSING TYPE

-ELECTRIC VALVE CONTROL: PLATFORM AND GROUND

-NATURAL SLANTING : <=0.5% OF RISING HEIGHT

SLANTING ANGLE SHOULD BE SMALLER THAN FOLLOWING DATA

α≤Kh                      α≤Kh

H=THE BIGGEST HEIGHT (mm)

K=0.01 – 0.02                K=0.01 – 0.02

-NATURAL LOWERING LENGTH: <=5MM, AFTER 20 MINUTES WHEN STAY AT ANY POSITION OF RISING OR LOWERING POCESS

-QUALITY: SMOOTHLY

MAIN CONFIGURATION

- PLATFORM MATERIAL: 5MM QUALITY FIGURE STEEL BOARD AND STRENGTHEN CHANNEL STEEL

-SISSOR MATERIAL: 150X50X5mm HIGH STRENGTHEN MN STEEL

- PAINT: TWO PRIMER PAINT + MIDDLE PAINT + SURFACE PAINT

-SEAL: JAPAN NOK

-TIRE:POLYURETHANEANTI-WEAR TIRE

-HYDRAULIC CYLINDER: Ø 80; TWO SINGLE DIRECTION CYLINDERS

-HYDRAULIC SYSTEM: HYCMAN

- EQUIPPED WITH AUTO-LOCK ANDEMERGENCY MANUAL LOWERINGFUNCTION